Mercury 200 Optimax Especificaciones descargar pdf (Pagina 120)

OUTBOARD INSTALLATION

108 eng

FUEL DEMAND VALVE (FDV) REQUIREMENT

Whenever a pressurized fuel tank is used, a fuel demand valve

is required to be installed in the fuel hose between the fuel tank

and primer bulb. The fuel demand valve prevents pressurized

fuel from entering the engine and causing a fuel system overflow

or possible fuel spillage.

The fuel demand valve has a manual release. The manual

release can be used (pushed in) to open (bypass) the valve in

case of a fuel blockage in the valve.

a - Fuel demand valve ‑ installed

in the fuel hose between the

fuel tank and primer bulb

b - Manual release

c - Vent/water drain holes

FUEL TANKS

Portable Fuel Tank

Select a suitable location in the boat within the engine fuel line

length limitations and secure the tank in place.

Permanent Fuel Tank

Permanent fuel tanks should be installed in accordance with

industry and federal safety standards, which include

recommendations applicable to grounding, anti‑siphon

protection, ventilation, etc.

FILLING THE FUEL SYSTEM

For the initial start of a new engine, or for an engine that ran out

of fuel or was drained of fuel, the fuel system should be filled as

follows:

1. Squeeze the fuel line primer bulb until it feels firm.

2. Turn the ignition key switch to the "ON" position for three

seconds. This operates the electric fuel pump.

46273

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 148 149

Sin comentarios

Mercury 200 Optimax Especificaciones Pagina 120