Mercury 200 Optimax Especificaciones descargar pdf (Pagina 61)

FUEL AND OIL

eng 49

DIRECTIONS FOR USING THE PRESSURIZED PORTABLE

FUEL TANK

1. When installing the fuel tank cap, turn the cap to the right

until you hear a click. This signals that the fuel cap is fully

seated. A built‑in device prevents overtightening.

2. Open the manual vent screw on top of the cap for operation

and cap removal. Close the manual vent screw for

transportation.

3. For fuel hoses that have quick disconnects, disconnect the

fuel line from the engine or fuel tank when not in use.

Follow Filling Fuel Tank instructions for refueling.

Filling Remote Oil Tank

Remove filler cap and fill with the specified oil. Oil tank capacity

is 11.5 liters (3 gallons). Replace filler cap and tighten securely.

IMPORTANT: Always make sure the oil tank caps are threaded

on tight. An air leak will prevent oil flow to the engine.

2723

Filling Engine Mounted Oil Reservoir Tank

NOTE: Filling this tank is only necessary if the oil level should

ever drop and the low oil warning system is activated.

1. Remove the top cowl.

2. Loosen the fill cap on the engine oil reservoir tank. Run the

engine until all the air has been vented out of the oil

reservoir tank and tank is filled with oil to the point of

overflow.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 148 149

Sin comentarios

Mercury 200 Optimax Especificaciones Pagina 61