Mercury 200 Optimax Especificaciones descargar pdf (Pagina 87)

MAINTENANCE

eng 75

Installation

1. Lubricate the O‑ring seals with oil.

a - Filter

b - O‑ring seals

c - Link rod

2. Install the fuel filter and tighten securely.

3. Reconnect the link rod.

IMPORTANT: Visually inspect for fuel leakage from the filter

while squeezing the primer bulb until firm, forcing fuel into the

filter.

DRAINING WATER FROM THE FUEL FILTER CHAMBER

NOTE: If a sufficient amount of water has accumulated in the

fuel filter chamber, the warning system will turn on. Draining the

water from the fuel filter chamber is required.

1. Pull the drain hose off the right side fitting. Hold the open

end of the hose over a container.

2. Use a 1/8 in. hex wrench and loosen the drain screw and

drain the fuel filter chamber.

29599

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 148 149

Sin comentarios

Mercury 200 Optimax Especificaciones Pagina 87