Mercury 200 Optimax Especificaciones descargar pdf (Pagina 86)

MAINTENANCE

74 eng

Fuel System

WARNING

Fuel is flammable and explosive. Ensure that the key switch is

off and the lanyard is positioned so that the engine cannot

start. Do not smoke or allow sources of spark or open flame in

the area while servicing. Keep the work area well ventilated

and avoid prolonged exposure to vapors. Always check for

leaks before attempting to start the engine, and wipe up any

spilled fuel immediately.

Before servicing any part of the fuel system, stop the engine and

disconnect the battery. Drain the fuel system completely. Use an

approved container to collect and store fuel. Wipe up any

spillage immediately. Material used to contain spillage must be

disposed of in an approved receptacle. Any fuel system service

must be performed in a well‑ventilated area. Inspect any

completed service work for sign of fuel leakage.

FUEL LINE INSPECTION

Visually inspect the fuel line and primer bulb for cracks, swelling,

leaks, hardness, or other signs of deterioration or damage. If any

of these conditions are found, the fuel line or primer bulb must be

replaced.

FUEL FILTER REPLACEMENT

Removal

1. Disconnect the link rod.

2. Use a fuel filter removal installation tool, or use the shaft of a

screwdriver between the lugs on the filter cap and unscrew

the filter.

Fuel Filter Removal/Installation Tool

91‑896661

24896

Aids in the removal and

installation of the fuel filter cap

assembly.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 148 149

Sin comentarios

Mercury 200 Optimax Especificaciones Pagina 86