Mercury ALPHA Especificaciones descargar pdf (Pagina 123)

121

CA839

Drive Belts

WARNING

Avoid possible serious injury. Make sure engine is shut off

and ignition key is removed before inspecting belts.

V-Belts (3.0L Model)

CHECKING

1 Inspect the alternator and power steering pump drive belts for the

following:

• Excessive wear • Fraying

• Cracks • Glazed surfaces

2 Check belt tension by depressing belts, with moderate hand

pressure, at points shown.

A Alternator Belt - Belt should depress 1/2 in. (13 mm).

B Power Steering Pump Drive Belt (If So Equipped) - Belt should de-

press 1/4 in. (6 mm).

REPLACING

Alternator Belt

3 Remove as follows:

A Remove power steering belt as outlined in the following.

B Remove the two port side, front engine mount bracket assembly

screws and washers.

C Remove the spacer block between the bracket assembly and the

engine block. It may be necessary to tap gently on the spacer to

allow removal.

INDEX

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 123