Mercury ALPHA Especificaciones descargar pdf (Pagina 151)

149

CA898

Closed Cooled (Coolant) Models

The following information outlines the procedures for draining the

seawater section of the closed cooling systems.

IMPORTANT: Drain seawater section

of closed cooling system

only.

CAUTION

If boat is to remain in water after draining, seawater inlet hose

must be removed and plugged to prevent a siphoning action

that may occur allowing seawater to flow from the drain holes

or removed hoses.

IMPORTANT: Boat must be as level as possible to ensure

complete draining of cooling system.

CAUTION

Seawater section of cooling system MUST BE COMPLETELY

drained for winter storage or immediately after cold weather

use if the possibility of freezing temperatures exist. Failure to

comply may result in trapped water causing freeze and/or cor-

rosion damage to engine. Damage caused by freezing IS NOT

covered by the Mercury MerCruiser Limited Warranty.

IMPORTANT: Closed cooling section must be kept filled

year-round with recommended coolant. If engine will be

exposed to freezing temperatures, make sure closed cooling

section is filled with an ethylene glycol antifreeze and water

solution properly mixed to protect engine to lowest

temperature to which it will be exposed. Quicksilver Premixed

Marine Engine Coolant is already mixed.

INDEX

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 151