Mercury ALPHA Especificaciones descargar pdf (Pagina 71)

10After engine has warmed up, check water temperature gauge to

ensure that engine temperature is not abnormally high. If it is, stop

engine immediately and determine cause.

11 Be sure charging system is functioning correctly.

12Observe power package for fuel, oil, water and exhaust leaks.

13To shift drive unit, return control/throttle lever to NEUTRAL. Move

control/shift lever with a firm, quick motion forward to shift to

FORWARD gear, or backward to shift to REVERSE. After shifting

drive unit, advance throttle to desired setting.

14Move control/shift lever to NEUTRAL and allow engine to drop to

IDLE speed. If engine has been run at high speed for a long period

of time, allow engine to cool by running at IDLE speed for 3 to 5

minutes.

15Turn ignition key to OFF.

CC829

CAUTION

To avoid possible ingestion of water that can damage engine

components:

• Do not turn the ignition key off when the engine is running

above idle speed.

• Do not use the lanyard stop switch to shut off the engine

above idle speed.

• When coming off plane, if a large following wave may roll

over the boat’s transom, apply a short, light burst of throttle

to minimize the wave action against the stern of the boat.

• Do not come off plane quickly, shift into reverse and shut

off engine.

INDEX

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 71