Mercury ALPHA Especificaciones descargar pdf (Pagina 157)

155

8 Attach the CLOGGED blue drain hose to the male end on the

water hose adapter fitting.

9 Fully open the water supply and allow it to run for 1 minute.

10Turn off the water supply.

11 Disconnect the water hose adapter from the blue drain hose and

the water hose.

12Push down on T-handle to force the blue drain hoses down below

their connection points to the block.

13Check for water draining from the blue drain hose. If blue drain

hose is still clogged, shut off the bilge pump and reattach the blue

drain hoses following Steps 7 - 9 in 3.0L Single Point Drain. The unit

will need to be serviced by an authorized Mercury MerCruiser dealer.

If water is draining, return to Step 4 of 3.0L Single Point Drain.

BOAT OUT OF WATER

Engine Not Running

1 Attach the water hose adapter fitting to a water supply.

2 Attach the clogged blue drain hose to the male end on the water

hose adapter fitting.

3 Turn on bilge pump.

4 Fully open the water supply and allow it to run for 1 minute.

5 Turn off the water supply.

6 Disconnect the water hose adapter from the blue drain hose and

the water hose.

7 Check for water draining from the blue drain hose. If water is

draining, return to Step 3 of 3.0L Single Point Drain. If water is not

draining, go to Boat Out of Water - Engine Running. If you cannot

perform the engine running procedure, the unit will need to be

serviced by an authorized Mercury MerCruiser dealer.

INDEX

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 157