Mercury ALPHA Especificaciones descargar pdf (Pagina 70)

5 Refer to A or B as appropriate for your model.

A Carbureted Engine

- Push THROTTLE ONLY button and position

throttle setting as follows:

COLD ENGINE - Move control/throttle lever to full throttle, then

return to about 1/4 throttle. In extreme cold it may be necessary

to pump lever more than once.

WARM ENGINE - Move control/throttle lever to 1/4 throttle posi-

tion.

FLOODED ENGINE - Move control/throttle lever to full throttle. Be

prepared to decrease engine speed to 1000-1500 rpm as soon as

engine starts.

B EFI Engine

- Position throttle setting as follows:

COLD ENGINE - Leave in neutral/idle speed position.

WARM ENGINE - Leave in neutral/idle speed position.

FLOODED ENGINE - Turn ignition switch to ON position. Push

the THROTTLE ONLY button and place the throttle lever at 50%

position. Attempt to start engine. As soon as engine starts, return

throttle to the idle position.

6 Turn ignition key to START. Release key when engine starts and

allow switch to return to RUN position.

7 Carbureted Engines - Move control/throttle lever back to

decrease engine rpm to 1000-1500 rpm if necessary.

8 Check oil pressure gauge immediately after engine starts. If oil

pressure is not within specified range (see SPECIFICATIONS), stop

engine immediately and determine cause.

9 If engine is cold, run engine for 1 or 2 minutes at fast idle

(1000-1500 rpm).

INDEX

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 70