Mercury ALPHA Especificaciones descargar pdf (Pagina 159)

157

CAUTION

Do not run engine above 1300 rpm. Suction created by

seawater pickup pump may collapse water supply hose,

causing engine to overheat.

WARNING

Be certain the area around propeller is clear and no one is

standing nearby. To avoid possible injury, remove propeller.

CAUTION

Watch temperature gauge on dash to ensure that engine does

not overheat.

6 Start engine. Allow it to run at idle until the obstruction is cleared

from the hose or for approximately 1 minute, whichever occurs first.

7 Shut off engine.

8 Shut off water supply to flushing attachment. Remove hose and

flushing attachment.

9 Check for water draining from the blue drain hose. If blue drain

hose is still clogged, shut off the bilge pump and reattach the blue

drain hoses following Steps 7 - 9 in 3.0L Single Point Drain. The unit

will need to be serviced by an authorized Mercury MerCruiser dealer.

If water is draining, return to Step 3 of 3.0L Single Point Drain.

INDEX

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 180 181

Sin comentarios

Mercury ALPHA Especificaciones Pagina 159